Product

FIXED VERTICAL LADDER – DIN 18799-1

Fixed aluminium access ladders for buildings.

Vertical access ladders provide safe, strong and efficient permanent access to buildings, installations and machinery, including at considerable heights. Rest platforms make climbing easier. Optional accessories allow the system to be adapted to different site requirements, while Jormax's optimised installation system can reduce fitting time by up to 30%. Modern, heavy-duty fixings improve durability and efficiency. Each installation is planned around its location and intended use to meet the applicable standards.
The MARINE-TYPE VERTICAL ACCESS LADDER – DIN 18799-1 is certified to standard DIN 18799-1.
Jormax reserves the right to change its products or technical specifications without prior notice.

Building height (m) 2.90 3.74 4.58 5.70 6.54 7.38 8.50 9.34 9.96 10.96 12.64 14.32 16.56 18.24 19.92
Ladder of exit 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.96 m ladders 1 – – 1 – – 1 – – 2 – – 2 – –
2.80 m ladders – 1 – 1 2 1 2 3 2 1 3 1 3 5 3
3.64 m ladders – – 1 – – 1 – – 1 – – 2 – – 2
Separation (m) – – – – – – – – – 5.44 6.28 7.12 8.24 9.08 9.92
Module of separation – – – – – – – – – 1 1 1 1 1 1
Number of fixings 4 6 6 8 8 10 10 12 12 10 12 14 18 20 22
Hoops of protection standard 2 2 3 3 4 4 5 6 6 4 6 7 9 11 12
Hoop of exit 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Reference 104000 104001 104002 104003 104004 104005 104006 104007 104008 104009 104010 104011 104012 104013 104014

* The intermediate landing module is common to all access ladder installations over 10.00 m high: two 2.80 m ladders, three standard safety hoops, one double connecting hoop and eight 2.20 m extension bars. Ladders are supplied for a specified height range (for example, model 104004 fits 5.71–6.54 m); any excess length is cut off at ground level.

Description

Fixed aluminium access ladders for buildings.

Vertical access ladders provide safe, strong and efficient permanent access to buildings, installations and machinery, including at considerable heights. Rest platforms make climbing easier. Optional accessories allow the system to be adapted to different site requirements, while Jormax's optimised installation system can reduce fitting time by up to 30%. Modern, heavy-duty fixings improve durability and efficiency. Each installation is planned around its location and intended use to meet the applicable standards.
The MARINE-TYPE VERTICAL ACCESS LADDER – DIN 18799-1 is certified to standard DIN 18799-1.
Jormax reserves the right to change its products or technical specifications without prior notice.

Exit
If the clearance at the exit from the ladder to the building exceeds 75 mm, an additional step must be fitted to bridge the gap.

Step of Exit – Fixing
The fixing standard provides a gap of 210 mm, measured from the centre of the rung to the wall. Other fixing options are available for different stand-off distances. The distance between fixings must not exceed 2.00 m and fixings should preferably be positioned immediately below the rungs.

First Step
The first rung must be positioned at a height above ground level between 100 mm (min.) and 400 mm (max.).

Protection Dorsal
Protection dorsal compulsory for ladders with height ≥ the 5,00 m.
Installation of the safety cage at a height between 2,20 to 3,00 m.

Download da Ficha Técnica

COMPONENTS INCLUDED IN THE VOLUME
• Fixings of wall standard
• Par joints coupling for ladders
• A ladder of exit wide
• Hoops of protection standard
• A hoop of exit
• Bars vertical
• Joints fixing bars vertical
• Ladders

Products Related

Jormax