Single Product

Home - , - TIPO MARINHEIRO

TIPO MARINHEIRO

Aluminum access stairs.

 

The vertical access ladders are an appropriate solution when buildings, plants or machines require a permanent access. The vertical ladders are robust, durable, efficient and allow ascent and descent safe, even at great heights. It has comfortable platforms allowing the user to rest and simplify the rise in the event of vertical displacement. The various accessories cover the versatile requirements that the ladder construction conditions may require. The Jormax optimized mounting system allows time savings up to 30% even in the case of multiple complex systems. A new fixation technique and high-strength rear important protection is the modern answer to the growing requirements for the production economy. We plan vertical ladders in close alignment with the requesting party, depending on the location and purpose of use. After all, good planning is half the solution. Depending on the conditions and purpose, different standards apply to the construction of vertical ladders. The vertical ladders Jormax meet these standards.

 

SELOS SELOS SELOS SELOS SELOS SELOS

 

Categories: ,

Description

Building Height Number of Steps Number of Steps Number of Steps Number of Steps Folding Folding Module* Amount Fixers Amount of Protection Arc Amount of Protection Arc REF Videos

m

mm

mm

mm
Exit Ladder 1960 2800 3640 Standard Exit

A ladder up to a height of 5 m (includes protective guards)
2.90 1 1 - - 4 2 1 104000
3.74 1 1 - - 6 2 1 104001
4.58 1 1 - - 6 3 1 104002

From a height of 5 m (includes protective guards)
5.70 1 1 1 - - 8 3 1 104003
6.54 1 2 - - 8 4 1 104004
7.38 1 1 1 - - 10 4 1 104005
8.27 1 1 2 - - 10 5 1 104006
9.34 1 3 - - 12 6 1 104007
9.96 1 2 1 - - 12 6 1 104008

From a height of 10 m (includes protective guards)
10.96 1 2 1 5.44 1 10 4 1 104009
12.64 1 3 6.28 1 12 6 1 104010
14.32 1 1 2 7.12 1 14 7 1 104011
16.56 1 2 3 8.24 1 18 9 1 104012
18.24 1 5 9.08 1 20 1 104013
19.92 1 3 2 9.92 1 22 12 1 104014

* The folding module is common to all access ladders for heights above 10 m. This module comprises:
• 2 ladders 2800 mm;
• 3 standard arcs;
• 1 double arc with junction;
• 8 extension bars with 2,20 m.

Components Included in the Provision of the Volume

 

• Standard wall fasteners REF: 100154;
• Pair engagement rings for the ladder REF: 100134;
• A wide exit REF: 100136;
• Standard protection hoops REF: 100142;
• An output hoop REF: 100141;
• Vertical bars REF: 100148;
• Unions fixing vertical bars REF: 100159;
• Ladders.

 

Attention

 

The ladders are always provided for a certain range of measurement.

 

Example:

Ladder REF: 104004 – This ladder is able to measure the range from 5,71 to 6,54 m. The ladder you need not be cut if the measure is 6,54 m, but if the measure 6,00 m, must be cut 0,54 cm on the ladder close to the ground.

DIN 18799-1


Ladders up to 10,00 m – without displacement.
Ladders up to 10,00 m – with displacement.

 

Place of Application

In buildings for maintenance and cleaning. Special regulations apply to chimneys with regard to assembly and back protection.
Please send us your request.

 

Planning and Use

The height of individual sections of the ladder, as well as the spacing of the rest platforms, is set according to a certain group of people (1 or 2) with regard to the experience in using vertical ladders.

(1) People with experience in using vertical ladders (as antennas builders).
(2) People with no experience in the use of vertical ladders (as private individuals).

The top step of the ladder should be at the exit level. From a height
of 10,00 m, the ladder shall be mounted with displacement. The maximum length of a ladder section can not exceed 10,00 m.

Ladder Features

DIN 18799-1

Exit

If the clearance at the outlet is greater than 75 mm, in relation to the building, must be applied one step to compensate the clearance.

 

Exit Step – Fixing

Standard fixation provides 210 mm clearance, from the center of the step to the wall. For different clearances, there are other mounting options. The distance between the fixings may not exceed 2,00 m and should be placed, preferably immediately below the steps.

 

First Step

The first step must be compulsorily placed at a ground height of 140 mm (min.) and 380 mm (max.).

 

Dorsal Protection

Mandatory back protection for ladders with height ≥ to 5,00 m. Placement of the back protection at a height between 2,20 to 3,00 m.

EN ISO 14122

EN ISO 14122: FIXED IN VERTICAL LADDER MACHINERY

Application:
As access to machines and fixed/mobile machinery.
This can also include a building as part of a piece of machinery.

DATASHEET

Download

Related Products

Store Company
0

My wishlist