Single Product

ELECTRIKAL F3

Ladder with pieces of aluminum and fiberglass convertible: step ladder or support position.

 

The Electrikal series are convertible ladders for professional use made of aluminum steps and fiberglass profiles in the 3rd piece part. Produced with an advanced automatic fixing indelibly, the steps to the profiles. Use in working with high voltage and electrical systems (1). Available in 1, 2 and 3 parts and can be used in wall support or step ladder position. The FV series is certified according to european standard EN 131.

 

(1) The use of insulating equipment does not replace adequate training to perform the work in accordance with Decree Law 50/2005.

 

NOME DOS SELOS (SUBSTITUIR) NOME DOS SELOS (SUBSTITUIR) NOME DOS SELOS (SUBSTITUIR) NOME DOS SELOS (SUBSTITUIR) NOME DOS SELOS (SUBSTITUIR) NOME DOS SELOS (SUBSTITUIR)

 

Description

REF

 

m

m

m

mm
KG
10284* 10 6.83 2.88 4.60 73x25 32.00
10285 12 7.97 3.48 5.12 80x25 38.00
10286 14 9.35 4.04 6.20 80x25 43.00

* also available in 80×25 mm profile

TECHNICAL

TECHNICAL

• Number of steps: 10 to 14;
• Step ladder height: from 4,60 to 6,20 m;
• Total height open: from 6,83 to 9,35 m;
• Width base ladder: 48 cm;
• Width end ladder: 35 cm;
• Distance between steps: 28 cm;
• Steps: 30×30 mm;
• Capacity: 150 kg.

EQUIPMENT

EQUIPMENT

• Anti-slip rubber pegs;
• Base stabilizer;
• 3rd part tested to 100,000 volts;
• Accidental anti-opening safety strap;
• Hardware in galvanized steel;
• Accidental anti-slip device – tested 360 kg
(the standard test 5.9);
• Section lock accessory;
• Anti-slip steps;
• Use and maintenance manual;
• Certificate of conformity with standard EN 131;
• Identification label.

OPTIONS

OPTIONS

• Wheels with sliding axis;
• Sliding wheels;
• Oscillating feet;
• Large size feet, only 80×25 mm profile.

ELECTRICAL CHARACTERISTICS

ELECTRICAL CHARACTERISTICS

Ladders and step ladders are tested to
meet the following electrical characteristics:

Rigidez elétrica Resistência de isolamento superfície Contaste elétrica com 50 Hz Fator de perda com 50 Hz
7-10 10-10 4-6 0.03-0.04
kV/mm - tg δ
DIN 53481 DIN 53482 DIN 53483 DIN 53483

TECHNICAL INFO

Download

0

My wishlist