Ladder with pieces of aluminum and fiberglass transformable: support position.
The Electrikal series are convertible ladders for professional use made of aluminum with fiberglass profiles and aluminum steps on the 3rd part. Produced with an advanced automatic fixing system that permanently fixes the steps to the profiles. Use in working with high voltage and electrical systems (1). The Electrikal series is certified according to european standard EN 131.
(1) The use of insulating equipment does not replace adequate training to perform the work in accordance with Decree Law 50/2005
| REF |  |
 m |
 m |
 mm |
KG |
|---|---|---|---|---|---|
| 10287* | 10 | 6.83 | 2.88 | 73x25 | 34.00 |
| 10288 | 12 | 7.97 | 3.48 | 80x25 | 40.00 |
| 10289 | 14 | 9.35 | 4.04 | 80x25 | 45.00 |
* also available in 80×25 mm profile.
• Number of steps: 10 to 14;
• Total height open: from 6,83 to 9,35 m;
• Width base ladder: 48 cm;
• Width end ladder: 35 cm;
• Distance between steps: 28 cm;
• Steps: 30×30 mm;
• Capacity: 150 kg.
• Anti-slip rubber pegs;
• Base stabilizer;
• Booster system with rope;
• 3rd part tested to 100,000 volts;
• Hardware in galvanized steel;
• Accidental anti-slip device – tested 360 kg (the standard test 5.9);
• Section lock accessory;
• Anti-slip steps;
• Use and maintenance manual;
• Certificate of conformity with standard EN 131;
• Identification label.
• Wheels with sliding axis;
• Sliding wheels;
• Oscillating feet;
• Size large feet: only profile 80×25 mm;
• Anti-slip system.
Ladders and step ladders are tested to meet the following electrical characteristics:
| Rigidez elétrica | Resistência de isolamento superfície | Contaste elétrica com 50 Hz | Fator de perda com 50 Hz |
|---|---|---|---|
| 7-10 | 10-10 | 4-6 | 0.03-0.04 |
| kV/mm | Ω | - | tg δ |
| DIN 53481 | DIN 53482 | DIN 53483 | DIN 53483 |
